STUDI PENERAPAN K3 DI LINGKUNGAN PRODUCTION PLANT-1 PT MULTI NITROTAMA
Abstract
The chemical industry is associated with high occupational risks due to hazardous chemicals, pressurized equipment, and complex production processes. Therefore, the implementation of Occupational Health and Safety (OHS) is essential to prevent workplace accidents and support sustainable industrial operations. This study aims to evaluate the implementation of OHS in the Production Plant-1 environment of PT Multi Nitrotama Kimia and identify areas requiring improvement. A descriptive qualitative approach was employed using primary and secondary data collected through direct observation, interviews, documentation studies, and analysis of the company’s I’m Safe program records. Data were processed through reduction, classification, tabulation, and presentation to assess OHS practices comprehensively. The findings show that workers consistently comply with Personal Protective Equipment (PPE) requirements and that emergency preparedness systems, including fire extinguishers, evacuation routes, Emergency Response Teams (ERT), and safety training programs, have been implemented effectively. However, deficiencies were identified in pipeline identification and safety signage systems. Most production pipelines lacked flow direction markers, and several work areas were not adequately equipped with safety signs. In addition, inconsistencies were observed in Pre-Start Briefing implementation and procedural compliance despite high participation in the I’m Safe program. As an improvement measure, flow direction markers were installed on production pipelines. Overall, PT Multi Nitrotama Kimia has demonstrated a strong commitment to OHSMS implementation, although improvements in hazard communication, risk control, and procedural consistency remain necessary.
Keywords : OHS, Safety Management System, Hazard Communication, Chemical Industry, Pipeline IdentificationTerdiriFull Text:
PDFReferences
Alifianto, A., Luh, N., Hariastuti, P., Industri, F. T., & Industri, J. T. (2025). ANALISIS POTENSI BAHAYA PEMBUATAN RAMBU K3 DENGAN JOB. 1.
Amaliah, R. U., Leni, U., & Hasibuan, M. A. D. (2022). ANALISIS IMPLEMENTASI EMERGENCY RESPONSE TEAM KEBAKARAN DI PT X BATAM. Kesehatan Ibnu Sina, 3, 1–9. https://doi.org/10.3652/J-KIS
Arman, U. D., Melasari, J., & Suwanda, A. R. (2022). Identifikasi Penyebab Kecelakaan Kerja Konstruksi Menggunakan Accident Root Cause Tracing Model (ARCTM) dan Fault Tree Analysis (FTA). Cantilever: Jurnal Penelitian Dan Kajian Bidang Teknik Sipil, 11(1), 17–28. https://doi.org/10.35139/cantilever.v11i1.112
Diarja, R. D. W., & Anwar, U. (2024). PENERAPAN RAMBU KESELAMATAN DAN KESEHATAN KERJA (K3) SEBAGAI PEMENUHAN HAM NARAPIDANA. Jurnal Komunikasi Dan Pengabdian Kepada, 1(2), 73–81.
Ekoputri, S. F., Rahmatunnissa, A., Nulfaidah, F., Ratnasari, Y., Djaeni, M., & Sari, D. A. (2023). Pengolahan Air Limbah dengan Metode Koagulasi Flokulasi pada Industri Kimia. Jurnal Serambi Engineering, 9(1), 7781–7787. Jurnal Serambi Engineering, 9(1), 7781–7787.
Fatmala, Y., W2, Y. D. A., Paskarini, I., & Martiana, T. (2023). Evaluasi Penggunaan Alat Pelindung Diri ( APD ) Untuk Meningkatkan Keselamatan Kerja di Industri Kimia memakai proses – proses yang satu industri yang memiliki risiko Pelindung Diri ( Samanlangi , et al 2002 ). Tujuan akhir dari penelitian ini kepada piha. Jurnal of Nursing and Health, 8(2), 170–179.
Firdayanti, E., Septihani, N., Apriyanty, S. A., & Suyono, A. M. (2024). PENERAPAN K3 (KESEHATAN DAN KESELAMATAN KERJA) DALAM UPAYA MEMINIMALISIR KECELAKAAN KERJA DI PT XYZ. Jurnal Taguchi: Jurnal Ilmiah Teknik Dan Manajemen Industri, 4(10.46306/tgc.v4i1), 132–150. https://doi.org/10.46306/tgc.v4i1.164
Firmasyah, A. D., & Ababiil, A. A. (2022). LAPORAN KERJA PRAKTIK ANALISIS EMERGENCY RESPONSE PLANNING PADA KESELAMATAN DAN KESEHATAN KERJA ( K3 ) PT SEMEN GRESIK PABRIK REMBANG. 1–85. https://lib.unnes.ac.id/20002/
Hakim, M. P. A., Rusba, K., & Ramdan, M. (2025). Implementasi Emergency Response Plan Keadaan Darurat Di Pt.Xyz. Identifikasi, 11(3), 630–637. https://doi.org/10.36277/identifikasi.v11i3.703
Hendri, H. A. (2024). Perlindungan Hukum Keselamatan Dan Kesehatan Kerja Berdasarkan Undang-. Jurnal Ilmu Hukum Prima, 7(2), 203–211.
Kolot, S. A. (2021). Tinjauan Penerapan SMK3 Berdasarkan Peraturan Pemerintah Nomor 50 Tahun 2012. Dohara Publisher Open Access Journal (DPOAJ), 1(1), 1–7. http://dohara.or.id/index.php/hsk%7C
Lubis, M. R., Putra, T. A. R., Karmel, M. E. R., & Maimun, T. (2024). Sosialisasi Emergency Response Plan di lingkungan Program Studi Teknik Pertambangan Universitas Syiah Kuala. KACANEGARA Jurnal Pengabdian Pada Masyarakat, 7(3), 353. https://doi.org/10.28989/kacanegara.v7i3.2105
Lumbantoruan, W. D., & Herwanto, D. (2025). Analisis K3 Operator Slitter Machine dengan Pendekatan Job Safety Analysis di PT ABC. Industrika : Jurnal Ilmiah Teknik Industri, 9(4), 1137–1145. https://doi.org/10.37090/d0vedc22
Mansyur, Hanief, S., Kurnia, D., Manik, T. S., & Yanto. (2023). Sistem Pemodelan Flow Rate Control Menggunakan Teknologi 4 . 0 di Laboratorium Instrumentasi PTKI MEDAN. JURNAL VOKASI TEKNIK (JuVoTek), 1–9.
Mayansara, A., Atnang, M., Dwiyanti, S., & Labanudi. (2025). Risiko Kecelakaan kerja : Perspektif Pegawai terhadap Implementasi Sistem Manajemen Keselamatan dan Kesehatan Kerja. Health Information: Jurnal Penelitian, 17, 176–186. https://doi.org/10.36990/hijp.v17i2.1543
Muhammad Zulfi Ikhsan. (2022). Hazard Identification, Risk of Work Accidents and Proposed Improvements Using the Job Safety Analysis (JSA) Method. Jurnal Teknologi Dan Manajemen Industri Terapan, 1(I), 42–52.
Putri Maimunah, Supriati Munthe, Akmal Fiqi Ranu Mahendra, Hifza Haridani, & Sri Hajijah Purba. (2024). Penerapan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) di Perusahaan Pertambangan: Review Literatur. Journal of Educational Innovation and Public Health, 2(3), 115–125. https://doi.org/10.55606/innovation.v2i3.3017
Rakhman, F., Andesta, D., & Waiusr, A. (2022). Identifikasi Bahaya Kecelakaan Kerja Di Pt . Toshin Prima Fine Blanking Menggunakan Metode Job Safety Analysis Dan Hazard. JUSTI (Jurnal Sistem Dan Teknik Industri), 2(2), 222–230. http://dx.doi.org/10.30587/justicb.v2i2.3569
Rangga, Y. D., Cahyono, A., Dewantoro, A. F., & Abrina, S. P. (2024). Efektifitas Penggunaan Metode Vacuum Crystalization untuk Proses Pembuatan Ammonium Nitrat dari Amonia dan Asam Nitrat. 6, 1–11.
Riyanto, I. F., & Nugraha, A. E. (2026). Analisis upaya pencegahan dan penilaian risiko kecelakaan kerja pada saat kalibrasi alat laboratorium dengan metode JSA Di PT XYZ Analysis of prevention efforts and risk assessment of work accidents during laboratory equipment calibration using JSA Method. 7, 1–10.
Rizky Aulia Firdaus, & Ananda Yhuto Wibissono Putra. (2025). Peran Karyawan dalam Budaya Keselamatan dan Kesehatan Kerja (K3) PT. Yura Putra Pratama. Journal of Engineering and Applied Technology, 1(2), 69–78. https://doi.org/10.65310/c66s6610
Suharyadi, H., Dulfi, A. J., Soegiarto, T. S., & Zulfaqar, A. H. (2022). Perancangan Sistem Perpipaan Untuk Fluida Mogas Dari Tangki TK0305 ke Pipa Header Suction Pompa 33LP0001. Jurnal Nasional Pengelolaan Energi, 38, 13–22. https://doi.org/https://doi.org/10.37525/mz/2022-1/358
Sya, A., & Herwanto, D. (2023). Analisis potensi kecelakaan kerja di area mesin ring frame m enggunakan metode HIRADC pada PT XYZ Potential analysis of work accidents in the ring frame machinery area using the HIRADC method at PT XYZ. 4(November), 313–322.
Wahyudi, I. A., Hidayat, N. F., Valentino, M. R., & Dwi, M. R. (2025). Penerapan Pelaksanaan Keselamatan Dan Kesehatan Kerja (K3) Pada Karyawan. EUNOIA: Jurnal Pengabdian Masyarakat, 4(2), 65–70. https://doi.org/10.36277/eunoia.v4i2.661
Yani, A. (2025). Efektivitas Pelatihan Keselamatan Kerja di Konstruksi Dan Peran Manajemen dalam Meningkatkan Kepatuhan K3 ; Literatur Review. Jurnal Ilmiah Ekonomi Manajemen & Bisnis, 3(1), 08–17. https://doi.org/10.60023/w9xcbn62
DOI: https://doi.org/10.71312/mrbest.v4i3.1046
Media Riset Bisnis Ekonomi Sains dan Terapan (MRBEST) Indexed by:
Publisher: Taksasila Edukasi Insani
Contact: Tri Ananto
Publisher Address: Jl. Cireundeu Raya No.1A, RT.002/RW.06, Kelurahan Cireundeu, Kecamatan Ciputat Timur, Kota Tangerang Selatan, Banten 15419.
Copyright © 2023 Media Riset Bisnis Ekonomi Sains dan Terapan (e-ISSN: 2987-1875)
Media Riset Bisnis Ekonomi Sains dan Terapan © 2023 by Taksasila Edukasi Insani is licensed under Creative Commons Attribution-ShareAlike 4.0 International.